With advanced laser level technology, Huepar is committed itself to providing solutions for a wide variety of applications of greater accuracy and precision.
Huepar 503DG Laser Level Benefits:
Laser level offers one 360-degree horizontal and two vertical 360-degree laser planes from one startup point.
Simultaneous leveling and alignment, and squaring right angles.
Self levels and indicates out-of-level condition up to +/-4 degree.
Rechargeable lithium battery brings much more convenience. LED blinks in red light when battery is low.
503DG 3 x 360 Green Laser Level Specifications:/b>
Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
Laser Wavelength: 505-520nm
Leveling Accuracy: +/-1/9 inch at 33Ft
Horizontal/Vertical Accuracy: +/-1/9 inch at 33Ft
Leveling/Compensation Range: 4 degree
Working Distance (Line): 150Ft (100 LUX), 200Ft with Huepar Laser Receiver
Operating Time: 6 hours continual use with all laser beams on
Power Source: 5200mA Li-ion battery
IP Rating: IP54dust-proof, waterproof and shockproof, reliable and tough
Operation Temperature Range:
Storage Temperature Range:
Mount Size: 1/4″-20 and 5/8″-11
1 x Huepar 503DG 360 Degree Green Self-Leveling 3D Cross Line Laser Level
1 x Magnetic Pivoting Base
1 x Portable Bag
1 x Laser Target Plate
1 x Rechargeable Lithium Battery
1 x User Manual
1x USB Power Cord
1x Power Adapter
The instrument is a laser class 2 laser product according to IEC/EN60825-1/2014. It is allowed to use unit without further safety precautions. Eye protection is normally secured by aversion responses and the blink reﬂex.
The laser instrument is marked with class 2 warning labels.
WARNING Emits Laser Radiation -Avoid direct exposure of the laser beam to the eyes.
Make sure this fitsby entering your model number.
✔️3 X 360 WITH FLOOR LINE LASER: This laser tool projects one 360° horizontal floor laser line for tiling installation at a 2/5″ distance. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1″ and 3.15″ height. Two vertical lines cross at 90°angles makes user quickly visualize and finish square layout. This 360 laser level is a complete tool for covering the floor, wall, ceiling all around the room.
✔️MULTIFUNCTIONAL LASER TOOL: The remote control enables to select three 360° laser lines individually at a distance up to 33Ft. With smart pendulum, this laser tool self levels and indicates out-of-level condition while pendulum unlocked. The laser tool will beep as a reminder when out of self-leveling range ±4°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG.
✔️DUAL POWER METHODS&TYPE-C PORT: Huepar laser tool employed large capacity lithium battery (can be purchased easily at local market) for 6 hours use with all beams on. An extra battery is included for backup. Besides, this laser tool can be used at job site by plugged in when take out the battery. With Type-C charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc. Users can charge the battery independently with the battery charger included.
✔️MAGNETIC BRACKET&MOUNTING THREADS: The strong magnetic bracket allows for quick positioning to metal surfaces, helping hang the laser level for wall applications. The four fine-tuning knobs on the bracket can adjust the left and right position, front and back position within 4.8 inch and the vertical angle against the wall. The laser tool comes with a 5/8″-11 female to 1/4″-20 male thread adapter as well as the 1/4″-20 mount thread to suit for standard tripod or pole mounts.
✔️DURABLE DESIGN&KIT CONTENTS: Over-molded metal laser window withstands tough job site conditions and can be removed and replaced with a screwdriver. The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool. The kit also includes 2 Li-ion batteries, magnetic bracket, lifting base, remote control, battery charger, type-c power cord, steel sheet, power adapter, 5/8″-11 thread adapter, laser target plate, user manual.
Amazon.com Price: $199.99 (as of 27/06/2021 21:09 PST- Details) Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.